Published: November 2026 · Well Water Quality
Disclosure: Some links on this page are affiliate links, meaning we may earn a small commission at no extra cost to you. This helps support our research and content.
By Lisa Martinez, Water Quality Specialist
Lisa holds a degree in Environmental Science and specializes in private well water safety and treatment, with a focus on inorganic contaminants and what lab reports actually mean for homeowners.
Seeing the phrase arsenic in well water on a lab report is one of the most alarming results a well owner can get — and one of the most misunderstood. Unlike bacteria or iron, arsenic has no taste, no odor, and no color, so nothing about the water will ever warn you. What your number means, whether your level is actually a problem, and which removal systems genuinely work all depend on details that most first-aid advice online gets wrong. After reviewing hundreds of private well lab reports for homeowners, the clearest pattern is this: the arsenic result is almost always actionable, and the right treatment depends on which chemical form of arsenic is present — information a standard test report will not always give you. This guide walks through what arsenic in well water actually is, where it comes from, the EPA’s 10 ppb limit and what it means for your household, how to test correctly, and the best removal options for homeowners in 2026.
Table of Contents
- What Arsenic in Well Water Actually Is
- Where Arsenic in Well Water Comes From
- Safe Arsenic Levels in Well Water: The EPA 10 ppb Limit
- Is Arsenic in Well Water Dangerous?
- Where Arsenic-Contaminated Wells Are Most Common
- How to Test Your Well for Arsenic (Step by Step)
- How to Remove Arsenic from Well Water: 6 Methods Compared
- Best Arsenic Removal Systems for Homeowners in 2026
- Frequently Asked Questions
- The Bottom Line on Arsenic in Well Water

What Arsenic in Well Water Actually Is
Arsenic is a naturally occurring element — a metalloid on the periodic table, element 33 — that is part of the earth’s crust. It is not a pollutant that someone dumped in your aquifer (most of the time). It is a mineral, like iron, manganese, or fluoride, that your aquifer leaches into groundwater as water percolates slowly through rock and soil over thousands of years. In well water, arsenic exists in two inorganic forms that behave very differently:
- Arsenate (As(V)) — the five-valent form, which is the more stable and more common form in oxygenated groundwater. This is the form that most home treatment media are designed to remove.
- Arsenite (As(III)) — the three-valent form, which is more soluble and harder to remove. Many filtration systems perform poorly on As(III) unless it is first oxidized to As(V).
That distinction is the single most important fact in this article. From the lab reports we have seen, a meaningful share of wells that test high for arsenic are high specifically in the As(III) form — and a homeowner who buys a standard whole-house filter for that water can run it for a year and see almost no improvement. Treatment design has to match the form that is present.
Key point: oxidation changes the answer
Most arsenic media (activated alumina, multivalent-metal filters, ion exchange) work well on As(V) and poorly on As(III). Aeration, chlorine, hydrogen peroxide, or ozone can oxidize As(III) into As(V) ahead of the media. If your well has the trivalent form, the treatment system is really two systems: an oxidizer plus a removal stage.
Where Arsenic in Well Water Comes From
In the great majority of private wells, arsenic is geological, not human-made. Water dissolves arsenic-bearing minerals — arsenopyrite being the classic example — from the bedrock and aquifer materials it flows through. Wells that tap deep, slow-moving groundwater in volcanic or geologically active terrain tend to pick up the highest concentrations, because the water has had more time in contact with arsenic-rich rock.
Anthropogenic (human) sources do exist and matter in specific situations. The big historical one is lead arsenate, a fungicide widely used on orchards and farms until the 1990s; wells near old treated orchard sites can show elevated levels. Other legacy sources include mining and smelting operations, industrial discharge sites, and chromated copper arsenate (CCA) treated wood from older construction. Septic systems, by contrast, are not a meaningful source of arsenic — septic influence shows up as bacteria, nitrates, and phosphate, not arsenic. That distinction helps you rule out (or in) local causes when interpreting a high result.
Safe Arsenic Levels in Well Water: The EPA 10 ppb Limit
The U.S. EPA enforceable maximum contaminant level (MCL) for inorganic arsenic in drinking water is 10 parts per billion (ppb), also written as 10 micrograms per liter. The limit was set in the 2001 Arsenic Rule, with compliance required in 2006, and the World Health Organization’s guideline value is the same 10 ppb. It is one of the most strictly enforced limits in all of drinking water regulation. Per the EPA’s arsenic guidance for private wells, you are responsible for your own water quality — there is no utility or inspector coming to check, so a lab test is the only way to know.
| Arsenic level (ppb) | Rating | What it means | Action |
|---|---|---|---|
| 0 – 5 | Low | Below half the MCL; no known health concern at these levels | None; retest on the normal schedule |
| 5 – 10 | Below MCL, elevated | Legal to drink, but above the level where a cautious household does nothing | Consider treatment if you have an infant, a pregnancy, or live in a high-risk area |
| 10 | At the MCL | The legal limit for public systems — treat it as the line | Install treatment for drinking water and retest within 6–12 months |
| 10 – 25 | Above MCL | Exceeds the enforceable limit | Treat now; verify the system with a post-install test |
| 25+ | Significant exceedance | Substantially above the limit; chronic exposure is a real risk | Treat drinking water immediately; have a professional review the whole-house options |
The 10 ppb line is a risk-management number, not a safe/unsafe cliff
MCLs are set to protect the most vulnerable population over a lifetime of exposure, with a margin of safety built in. That is why 8 ppb is not “safe” in a clinical sense and 12 ppb is not an emergency — but the 10 ppb line is the one regulators, labs, and insurers all use, and it is the line you should hold yourself to.
Is Arsenic in Well Water Dangerous?
Yes — chronic exposure above low levels is a recognized health hazard, and arsenic is classified as a Group 1 human carcinogen by the International Agency for Research on Cancer. What makes it insidious is the timescale: there are no acute symptoms. The effects of arsenic in well water build over months and years of daily consumption, which is exactly why a well owner never knows there is a problem without a lab test.
The clinical picture, from the medical literature, is well established. The earliest warning sign is usually skin changes — thickened, darkened patches (hyperpigmentation) and keratoses, typically on the palms and soles. Sustained exposure is associated with increased risk of skin, lung, and bladder cancers, and with cardiovascular disease and diabetes. There is no established “no-effect” level, which is why the EPA’s limit carries a large safety margin. If you have an infant on formula or an active pregnancy in the household, a 5–10 ppb reading deserves more attention than it does for a household with no vulnerable members — see our guide on whether well water is safe for babies for how arsenic fits into a full infant water-quality panel. Arsenic is also one of those contaminants that travels with the geology: if your area is elevated for arsenic, it is worth checking for the other geologic contaminants at the same time, which is the topic of our uranium in well water guide.
Where Arsenic-Contaminated Wells Are Most Common
Arsenic in well water is a regional phenomenon with sharp local variation. In the United States, the areas with the highest documented incidence are:
- New England — the EPA’s 2009 private well survey found that roughly 15–25% of sampled wells in parts of Connecticut, Massachusetts, New Hampshire, and Vermont exceeded the 10 ppb MCL, the highest incidence in the country.
- Upper Midwest — Minnesota, Wisconsin, North Dakota, and Montana show elevated arsenic in deep aquifers.
- The Intermountain West — Colorado, California, Arizona, Nevada, and Idaho have well-known arsenic-prone aquifers, particularly volcanic and geothermal terrain.
Internationally, the affected populations are much larger (Bangladesh and parts of India are the most severe cases in the world), but for a U.S. well owner the regional pattern is what matters. The important caveat, from the reports we have reviewed, is that region is a prior probability, not a verdict: wells in “low-risk” areas exceed the MCL, and many wells in high-risk areas test well below it. A test is the only thing that settles it for your specific well.
How to Test Your Well for Arsenic (Step by Step)
There is no reliable way to test for arsenic at home. The EPA has never recognized any home test kit as accurate for arsenic at the 10 ppb level, and the cheap test strips and “arsenic drop tests” sold for home use are not designed for the precision this contaminant requires. A lab test is the only defensible answer, and it is cheaper than most well owners expect.
- Run the cold water tap for 3–5 minutes before sampling. This flushes water that has been sitting in the pipes so the sample reflects the well, not the plumbing.
- Fill the lab’s container — a clean 1-liter sterile bottle from the lab — from the tap nearest your well, without opening the bottle until it is ready.
- Label it and keep it cool. If you are not dropping it off the same day, refrigerate it and deliver it within 24–48 hours.
- Send it to a state-certified drinking water lab. Arsenic is measured by EPA Method 200.8 (ICP-MS) or EPA Method 245.1 (hydride generation atomic absorption) — both are routine lab tests, and the lab will use whichever is standard for your state.
- Ask for total inorganic arsenic, and run a full panel at the same time. Adding nitrate, lead, and bacteria to the sample costs only a little more and gives you the complete picture in one draw. For a full cost breakdown, see our guide on how much it costs to test well water in 2026 — a basic arsenic panel typically runs $40–$100.
When to retest
Test once after drilling, after a significant drought or a change in your water level, after a new well is drilled nearby (aquifers are shared), and every 1–2 years if you have ever had a result above 5 ppb. Arsenic in an aquifer is essentially permanent, so a well that is clean stays clean — but water levels change, and what your pump reaches can change with them.
How to Remove Arsenic from Well Water: 6 Methods Compared
Every effective arsenic removal method works by one of two mechanisms: adsorbing arsenate onto a specialized media, or rejecting it through a membrane. The comparison below is the core of this guide — the form of arsenic present (As(III) vs As(V)) is the column that decides your purchase.
| Method | Removes As(V) | Removes As(III) | Scope | Key limitation |
|---|---|---|---|---|
| Reverse osmosis (under-sink) | 85–99% | 85–99% | Point of use — one kitchen tap | Reject water ratio of 2–4:1; only the treated tap is safe |
| Activated alumina (AA) media | 85–95% | Poor without oxidation | Whole house | Needs pH 6–7; requires As(III) pretreatment; periodic brine regeneration |
| Multivalent-metal (MVM) filter, NSF/ANSI 53 | 85–95% | Limited without oxidation | Whole house | Cartridge replacement cost; As(III) pretreatment required |
| Ion exchange | Good | Poor | Whole house | High-sulfate water competes for resin sites; regenerant disposal |
| Iron coagulation + filtration (chemical feed) | 90%+ | 90%+ with oxidizer | Whole house | Chemical feed pumps, backwash plumbing, largest footprint of any option |
| Aeration / oxidation (aeration, H2O2, chlorine, ozone) | Does not remove | Converts As(III) to As(V) | Pretreatment stage only | Must be paired with a downstream removal method |
One common false friend: greensand and iron/manganese media do co-remove a modest amount of As(V) as a side effect, which is why some “iron filters” advertise arsenic. We have seen enough lab reports showing this to be emphatic — do not buy an iron filter as your arsenic system. It is a different machine solving a different problem.
Best Arsenic Removal Systems for Homeowners in 2026
Based on the removal data above and what we have actually seen installed and tested at home, these are the systems that make sense for a well owner in 2026. The right pick depends on whether you need drinking-water-only treatment or whole-house treatment, and on which arsenic form your water carries.
3M AP902 — Whole House Multivalent-Metal Filter
The 3M AP902 is the reference whole-house multivalent-metal filter for arsenic. It is NSF/ANSI 53 certified for arsenic (As(V)) and lead, installs at the point of entry where a softener would go, and treats every tap in the house. In our experience it is the strongest single answer to “my whole house water has 12 ppb of arsenate” — with the caveat that if your well is carrying As(III), you still need an oxidation stage in front of it.
Filtrete 20002 Whole Home Arsenic and Lead Filter
The Filtrete 20002 is 3M’s other whole-home line for arsenic and lead. It is a cartridge-based system in the same performance class as the AP902, and it is a practical alternative where space or plumbing constraints make the AP902 awkward. Same guidance applies: verify your arsenic is the pentavalent form before relying on it.
APEC ROES-50 — Under-Sink Reverse Osmosis
For a household that needs treated drinking and cooking water only, the APEC ROES-50 is the value pick. It is a 6-stage, 75-gallon-per-day system that removes 99%+ of inorganic arsenic in both forms, which is exactly the property that makes RO the default answer for point-of-use arsenic treatment. The trade-off is the reject water — for every gallon of drinking water you get, 2 to 4 gallons go down the drain — and the fact that only the dedicated RO tap is treated. Our full reverse osmosis for well water guide covers sizing and model comparisons in detail.
iSpring RO600G — High-Capacity Reverse Osmosis
The iSpring RO600G is the same category at 600 gallons per day, which suits larger households or anyone who bottles water at home. Higher throughput also means less reject water per gallon of product. For a family of five where the whole household drinks well water, this is the better buy than a 75-gallon unit.
Where to Buy Arsenic Treatment for Well Water
| What you need | Recommended product | Typical use case |
|---|---|---|
| Whole-house arsenic (As(V)) removal | 3M AP902 | 10–25 ppb arsenate, every tap must be treated |
| Whole-home cartridge alternative | Filtrete 20002 | Tight mechanical room, same performance class |
| Drinking-water-only, budget | APEC ROES-50 | Household treats kitchen tap only |
| Drinking-water-only, high volume | iSpring RO600G | Larger household, less reject water |
| Activated alumina refill media | Activated alumina media | Refilling a professional AA vessel |
| General well water screening kit | Well water test kit | First-pass screening (not for arsenic decisions) |
Frequently Asked Questions
Is 10 ppb of arsenic safe to drink?
It is the legal limit, and that limit was set with a large safety margin for lifetime exposure — but there is no established no-effect threshold for arsenic. The practical answer: at or below 10 ppb you are in compliance with every standard in the country, and most households do nothing. Above 10 ppb, install treatment for drinking water and verify it with a follow-up test. Between 5 and 10 ppb, the decision is personal — it is the zone where we usually recommend treatment if an infant or a pregnancy is in the household.
Can a water softener remove arsenic?
A standard salt softener is not an arsenic treatment. It exchanges sodium for calcium and magnesium, and while a small amount of As(V) can be co-removed on the resin, the removal is inconsistent and it does nothing meaningful for As(III). There are specialty ion-exchange resins that handle arsenate better, but a softener bought for hard water should never be counted on as your arsenic system.
Do home arsenic test kits work?
Not reliably, and you should not make a health decision on one. No home kit is recognized by the EPA for arsenic at the 10 ppb level. The color-change strips on sale are calibrated for ranges far above what a well owner needs to detect, and they cannot distinguish As(III) from As(V). A state-certified lab panel is $40–$100 and is the only result worth acting on.
How often should I test my well for arsenic?
Once after drilling or buying a home, once after a drought or a noticeable drop in water level, and once if a new well is drilled on a nearby property. If any result ever exceeds 5 ppb, retest every 1–2 years. If your well has always tested below 5 ppb and your area is not in a known high-risk zone, an every-2-to-3-years cadence with the standard panel is reasonable.
Do I need whole-house treatment or just a drinking water tap?
For the health standard, drinking and cooking water is what matters, and a point-of-use RO unit at the kitchen tap satisfies that completely — it is the lowest-cost compliant fix. Go whole-house (AA or MVM media) if you also want to remove arsenic from shower, laundry, and irrigation of edible gardens, or if multiple taps and appliances rely on the raw water. If your water is high in As(III), add an oxidation stage in front of whichever option you choose.
The Bottom Line on Arsenic in Well Water
Arsenic in well water is invisible, odorless, and usually geological — but it is one of the most tractable contaminants a well owner can fix, provided you do three things in order: test with a state-certified lab instead of a home kit, find out which form (As(III) or As(V)) is in the water, and match the treatment to that form. A 75-gallon under-sink RO system at the kitchen tap is the default compliant answer for drinking water. A whole-house multivalent-metal or activated-alumina system, with an oxidation stage if your water carries arsenite, is the answer when every tap needs to be clean. Either way, the system is not finished until a post-install lab test proves the number is where it should be.
See Also
- Reverse Osmosis for Well Water 2026: Best Systems — the full model comparison behind the RO picks above, including reject water math.
- How Much Does It Cost to Test Well Water in 2026? — lab pricing for the arsenic panel and the rest of the standard well water test.
- Is Well Water Safe for Babies 2026: What to Test and Fix — how arsenic, nitrate, and bacteria fit into a household with an infant.
#Arsenic #WellWater #PrivateWell #WaterQuality #WellTesting #WaterTreatment #ReverseOsmosis #WellOwner #WaterSafety #WellMaintenance #DrinkingWater #WellWaterTesting #ArsenicRemoval #HomeWell #Wells2026
